Audio base, Insulator, Audio Accessories Page 3

PB-20 Product pin type base made from the Africa ebony
Four pcs. set \6,200 (according to tax) Withstand load: 50kg (four pieces)
It is a pinpoint base of the diameter of 41mm of the Africa ebony used for oboe etc. Or combining PB-21, it places under a speaker, amplifier, etc. and a sound quality improvement can be performed. The effect that specific gravity tightens sound by the pinpoint support effect for 1.4 and the strong, very heavy quality of the material becomes large. The height of 21mm and a spike part of the height of a main part is 5mm. Although it is of the same type as PB-9, since size is large, the stability at the time of installation increases.
PB-21 Product spike receptacle base made from the Africa ebony
Four pcs. set \5,600 (according to tax) Withstand load: 50kg (four pieces)
It is a spike receptacle base of the diameter of 41mm of the Africa ebony used for oboe etc. Independent, it places under a speaker, amplifier, etc. combining PB-20, and carries out. When a metaled spike is received, in metal, resonance is suppressed and the sound which was clear and became tight by intrusion of a moderate spike is obtained. Although it is of the same type as PB-10, since size is large, the stability at the time of installation increases.
PB-19 Product point receptacle spacer made from alumina ceramics
16 pcs. set \4,200
It is the spacer made from alumina ceramics currently used also for PB-18. It is a product made from alumina 96 ceramics of an altitude 9. One side is a loose R side at 12mm2.2mm in height in diameter. It can be used as point support by sticking on other metal, the base of wood, etc. with a quick-drying glue.
PB-22 Triangular base made from an ebony
Four pcs. set \1, 200, withstand load (according to tax): 25kg (four pieces)
It is the point supporting base which processed the hard and strong striped ebony from Southeast Asia into the triangle. Although a triangular vertex serves as a line instead of a point, if it is used for amplifier, a speaker, etc., it controls, and it is stabilized and it can support vibration. The size is [ the bottom ] 18mm in height in 25mmx38mm. Paint etc. was abandoned taking advantage of the merit of a material, and the price was held down low.
PB-23 Product made from Africa ebony large-sized spike receptacle base
4 pcs. set \11,000 (according to tax) withstand load: 100kg (four pieces)
It is a large-sized spike receptacle base of the Africa ebony used for oboe etc. Or combining PB-9 and PB-20, it places under a speaker, amplifier, etc. and a sound quality improvement can be performed. When a metaled spike is received, the sound which resonance was suppressed, was clear and became tight about metal is obtained. With 59mm in diameter, and 20mm in height, since it is large, it is stabilized and large-sized spike apparatus can be supported.
VB-18 Product made from ebony V character slot receptacle base
2 pcs. set \7,500 (according to tax) withstand load: 40kg (two pieces)
It is the base made from the ebony of 25mm width x27mm height x180mm length manufactured by a completely new view. It is a form where the triangular prism type spacer rode on the square lumber to which the V character type slot was attached. An up-and-down point of contact becomes a line, and controls vibration effectively. An up-and-down side is even, and since stability is good, even if it uses it for a speaker etc., it does not become unstable but is safe. One set is used for amplifier and two sets are used for a speaker.