|
BT-1 Product cartridge made from titanium fixed bolt set
Four set of two pcs. screw, 2pcs. nut attached \3,500 (according to tax)
BT-1 is a set of the screw which fixes a cartridge. The quality of the material is light at a titanium alloy, and is high, and if it is used, there is an effect of the improvement in sound quality of intensity. Specific gravity of a titanium alloy is abbreviation halves, such as 4.5 and brass, and intensity has the intensity which is equal to steel. Since the sound field is also used for honed Leiber's diaphragm etc., it can be said that the merit of the sound quality side is large. A bolt is four sorts (6, 8, and 12 or 15mm), a nut is M2.6 and the opposite neighborhood is 4.0mm. As for the nut, the path of the opposite neighborhood is usually small from the type by the product made from a Gold plated Brass. This is as convenient as something at the time of attachment of a cartridge. |
|
YR-01 Teflon silver plating line shell lead
4 pcs. set \3,300 (according to tax)
The Teflon covering silver plating copper wire of a very thick is adopted as the wire rod of YR-01 of a shell lead. This Teflon line is a line which our company is using for amplifier etc., and is manufactured based on MIL specifications and standards, it excels in durability, and electric insulation is also the highest wire rod. the thickness of a lead is the thickness 22, in AWG (American wire gauge) a cross-section area with 0.38 Skaer. The YRT-01 equivalent article of phosphorus bronze shaving out was adopted as the terminal. Improvement in sound quality can be aimed at with positive contact and a quality wire rod.
|
|
Shell lead terminal YRT-01
Eight-piece 1set \2,400 (according to tax)
At our company, many tube sockets were manufactured for some time, those product development technology was applied and the connector terminal which it began to delete from the round bar of next door bronze excellent in the product made from a spring was manufactured. It is convenient when making an original shell lead by itself. Since the 1.0mmmm dia. [ in diameter ] and cartridge side is [ the arm side ] very as small as 1.2mmmm dia., a shell lead terminal needs technology for soldering. The surface treatment used the nonmagnetic base sheet, and also has plated 1 micron of Gold plating. |
|
ST-30-2 For speaker boxes Speaker terminal
End of production (according to tax, 2 pcs. sets)
ST-30-2 is a speaker terminal of the new model which is easy to use and can moreover obtain the highest sound. The main part part of the terminal was made from cutting from pure copper, and has given nonmagnetic Gold plating. The cable of a maximum of 8mm can be joined, and the banana plug is also supported. Size is an object for speaker boxes in bottom 30mm of a head in length. The board thickness of a box can be used to 25mm. When thicker than 25mm, use the portion for a space-cutout, putting in. An attachment hole is 8mm.
Since the O-ring of five colors which classification by color can do is attached, the classification by color for surround speakers is also possible. |
|
ST-12-2 Teflon insulation speaker terminal for amplifier
End of production(according to tax, 2 pcs. sets)
ST-12-2 is a speaker terminal of the new model which is easy to use and can moreover obtain the highest sound. The main part part of the terminal was made from cutting from pure copper, and has given nonmagnetic Gold plating. The cable of a maximum of 8mm can be joined, and the banana plug is also supported. Size is an object for amplifier in bottom 12mm of a head in length. The spacer made from Teflon is attached. The board thickness of an amplifier panel can be used to about 5mm. Since insulation is using the most excellent Teflon, the merit of a sound quality side is large. Since the O-ring of five colors which the classification by color which is 10mm can do is attached, the classification by color for surround speakers is also possible for an attachment hole. |
CK-1 the display stand for one CD
End of production(according to tax)
CK-1 is CD stand which puts and exhibits only one CD. It was processed so that the pure material of a cherry tree might be trenched and CD could be built. Favorite CD can be set at bedside or it can be used for exhibition of a store. Since size is made from the size (10mm in thickness) of common CD, it suits neither double size nor a thin jacket. |
|