\68,000 (tax exception, one pc.) withstand load: 100kg
It is a speaker stand for large-sized speakers from a medium size. It is the highly efficient stand which stood the support by the pure material of the 10cm angle of Asada Cherry wood to four corners, and was supported at the joint by the cherry tree plywood of a central portion. Since a support is started downward, as for the weight of a speaker, the speaker of about 100kg heavy weight class is also stabilized, and it can be installed. A normalized form is 350x480x400 (H) in the object for Tannoy sterling. It can respond to the speaker of various sizes by changing the size of a support and joint. Since special order size is also possible, ask a price etc. to our company.
DKS-60 Speaker stand made from cherry tree material
\84,000 withstand load (tax exception and two pcs. set): 60kg
It is a speaker stand for medium size speakers. It is the stand which used the pure material of the 10cm angle of Asada Cherry wood for the support, used the Asada Cherry wood laminate lumber of 32mm thickness for the up-and-down board, and attached importance to the beautiful sound to cherry tree material. Size is 250(W) x360(D) x600(H). The hollow is attached to the up-and-down side so that three-point support can be performed, and it is used there combining a pin type base. Then, a speaker loses touch with a board on top only 3mm, and is supported three points. Since I am preparing DKS-KIT as a stand where the size of a speaker differs from height, various speakers can be suited.
DKS-UPD(up-and-down board) \13,000 (tax exception, one sheet)
Board size: 300(W) x400(D) x32 (thickness)
DKS-BTD(only for lower board) \13,000 (tax exception, one sheet)
Board size: 300(W) x400(D) x32 (thickness)
DKS-UPW(up-and-down board) \13,500 (tax exception, one sheet)
Board size: 400(W) x300(D) x32 (thickness)
DKS-UPDM \(up-and-down board) 12,500 (according to tax one sheet)
Board size: 250(W) x360(D) x32 (thickness)
DKS-UPDS(up-and-down board) \12,000 (according to tax one sheet)
Board size: 220(W) x300(D) x32 (thickness)
It is an up-and-down board for DKS stands. fundamental the upper and lower sides it can be used for both. The board larger 1 size to a lower board than a top plate is recommendation. An up-and-down board, two supports each, and pinpoint base base PB-9 It becomes 1 set using three sets.
DKS-SP 70 (support) \13,500 (tax exception and 1pc.)
Size: 100x100x664mm (H) (for height 700)
DKS-SP 60 (support) \10,600 (tax exception and 1pc.)
Size: 100x100x564mm (H) (for height 600)
DKS-SP 50 (support) \9,800 (tax exception and 1pc.)
Size: 100x100x464mm (H) (for height 500)
DKS-SP 40 (support) \7,000 (tax exception and 1pc.)
Size: 100x100x364mm (H) (for height 400)
DKS-SP 30 (support) \6,000 (tax exception and 1pc.)
Size: 100x100x264mm (H) (for height 300)
It is a support for DKS stands. Since it is attached even if a support differs in height, and a size does not change, exchange can be done easily. Eight screws of an up-and-down side are only removed.
DKS-UPDSS(up-and-down board) \11,500 (according to tax one sheet)
Board size: 200(W) x240(D) x32 (thickness)
DKS-UPD3S(up-and-down board) \11,000 (according to tax one sheet)
Board size: 160(W) x210(D) x32 (thickness)
DKS-SP 20 (support) \5,000 (a tax exception and 1pc.)
Size: 100x100x164mm (H) (for height 200)
It is the up-and-down board and support which were sold to DKS stands by the addition. The latest small speaker is suited. Moreover, DKS-SP-20 is convenient when a short stand is constituted. It is suitable to make height low by the case where you sit on a carpet soon and hear it etc. The up-and-down board of size larger, of course can also be used.
DKS-UPD3S(up-and-down board) \11,000 (according to tax one sheet)
Board size: 160(W) x210(D) x32 (thickness)
DKS-SP 10 (support) \5,000 (a tax exception and 1pc.)
Size: 100x100x64mm (H) (for height 100)
It is the up-and-down board and support which were sold to micro speakers by the addition. The persons used in a desk side these days in a micro speaker are increasing in number. A good sound will not be obtained if it puts on a desk soon, also although it is called a micro speaker. A clear sound will be obtained, if a few is raised and three points are supported in a stand. It is effective if double-stick tape is stuck on prevention from a fall at a pin part.
