Audio base, Insulator, Audio Accessories Page 8

The rack shelf board for OSB-M OS series
22,500(according to tax, one sheet)
It is a simple substance sales article of a rack shelf board using 30mm thickness cherry tree plywood. It is used when inserting a shelf board in OS-52, OS-77, OS-92, and OS-122 by addition. Eight attachment screws per sheet are attached. If the additional purchase of the shelf board is carried out also when changing a support and making a short rack high after purchase, the product which it has will not become useless. The outside dimension is 4.9kg per sheet in weight in 520(W)450(D)30(H).

The rack shelf board for OSB-W OSW series
42,500(according to tax, one sheet)
It is a simple substance sales article of a rack shelf board using 30mm thickness cherry tree plywood. It is used when inserting a shelf board in OSW-52, OSW-77, OSW-92, and OSW-122 by addition. Eight attachment screws per sheet are attached. If the additional purchase of the shelf board is carried out also when changing a support and making a short rack high after purchase, the product which it has will not become useless. The outside dimension is 9.6kg per sheet in weight in 1040(W)450(D)30(H).

OSL-32 32cm rack support in height
5,000 (according to tax, one sheet)
OSL-52 52cm rack support in height
6,250 (according to tax, one sheet)
OSL-77 77cm rack support in height
8,200 (according to tax, one sheet)
OSL-92 92cm rack support in height
10,000 (according to tax, one sheet)
OSL-122 122cm rack support in height
12,500(according to tax, one sheet)
It is a simple substance sales article of a rack support. It is convenient when those who already use the rack of OS series want to change height. It is common to OS series and OSW series.
PN-2 Punching net for 38cm speakers
18,000 (according to tax, one sheet)
It is a punching network for 38cm speakers used for its own speaker system etc. Since the alumite of champagne gold is given by the product made from aluminum of 2mm thickness, it excels in durability and there is almost no aging. Since a punching network does not absorb sound sound unlike the networks of cloth, as for the feature, there is little influence on the sound of a speaker. An outside dimension is an eight-point stop (428(diameter) 25 (height) and attachment hole pitch 412mm). Attachment uses and attaches the spacer of a direct plastic to a buffle side without the attachment hole of a speaker unit.
PN-3 Punching net for 16-20cm speakers
7,800 (according to tax, one sheet)
It is a punching network 16cm - for 20cm speakers used for its own speaker system etc. Since the alumite of champagne gold is given by the product made from aluminum of 2mm thickness, it excels in durability and there is almost no aging. Since a punching network does not absorb sound sound unlike the networks of cloth, as for the feature, there is little influence on the sound of a speaker. An outside dimension is a four-point stop (234(diameter) 15 (height) and attachment hole pitch 222mm). Attachment uses the spacer of a direct plastic for a buffle side without the attachment hole of a speaker unit, and attaches it with a wood screw.
TS-2A JBL2405, the tweeter stand for 075
22,000 (according to tax, one piece)
It is a tweeter stand used for JBL2405, 075, and pioneer ET-703 grade. It is the high product of grace which delete and take out up and was made from Asada Cherry wood laminate lumber. The tweeter unit was inserted from the back of a stand, and the screw of the flange was not used but has taken the method of pressing down and fixing from the Се side of a phon with the screw of a plastic on top. Influence of vibration is made hard to be influenced by building the pin made from an ebony into the bottom of a stand, and supporting three points. If a tweeter unit is also fixed to a stand, sound will be stabilized and the relation with inside compass will also become good. JBL2405H of a ferrite magnet can be used.