New Product Pinpoint Setting base
PB-204 pieces the price: 6,200yen
PB-214 pieces the price :5,600yen
Setting base PB-20, PB-21 are the setting base for the amplifier,
speaker that combine each independently or mutually and use. The
material is hardest in every wood matelial even the strength is
using one African ebony material (official scientific name African
Black Wood) of a high material. There is an established opinion
in the goodness of the sound, with the material that is used to
the oboe and the clarinet of the musical instrument actually,
although this material is a rare material now.
PB-20 is doing the pin style and spread under the amplifier and
speaker as it is and can make the point support. Also, we spread
PB-21 of spike pin under the pin of the speaker and amplifier
that are doing the concavity and was attached and able to use
as the receiver base. Also, PB-20, PB-21 become flat with a top
and bottom face when combines each and amplifier use downward
as the top and bottom structure and support stability good audio
devices and can make 3 points or 4 point supports.
There are many case that the metal unique resonance sound leads
to the spike made of the metal although there are many cases usually
the metal is used in these pinpoint base and can obtain the playback
sound that prevents those resonance sound and became perfectly
clear to the ear comfortably by combining the hard wood matelial
of PB-20, PB-21 etc. of our company. The spike of the metal, encroach
appropriately by combining PB-21, although the resonance sound
is easy to get on when we receive the spike pin made of the metal
with the plate of the metal especially and stabilize and can prevent
metallic resonance moreover,.
There are the base called PB-9, PB-10 where adopted the same material
in the launching to our company than before, PB-20, PB-21 it is
the product that enlarged them the round. PB-9, PB-10 are seen
the effect and be becoming with one of the bestseller product
of our company. However, it might lack the sense of security a
little bit in the case that PB-9, PB-10 combined with the for
audio devices of small a little of the size. PB-20, PB-21 are
the upgrade product that improved those points. PB-9, PB-10, PB-20,
PB-21 are possible even combination etc. of PB-9 and PB-21, PB-10
and PB-20 because the measure of each pin department, plate style
department are same.
PB-20 spec.
External form measure: the diameter 41 mm the height: 21 mm /the
height of the pin department: 5 mm
Material: the African ebony (specific gravity about 1.4)
We combine (4 pieces the price: 6,200yen)
PB-21 spec.
External form measure: the diameter 41 mm the height: 14 mm /
depth of the form department: 3.5 mm
Material: the African ebony (specific gravity about 1.4)
We combine (4 pieces the price: 5,600yen)
<The reference> the
PB-9 spec.
External form measure: the diameter 34 mm the height: 19 mm /
height of the pin department: 5 mm
Material: the African ebony (specific gravity about 1.4)
We combine (4 pieces the price: 4,200yen)
<The reference> the
PB-10 spec.
External form measure: the diameter 34 mm the height: 12 mm /
depth of the form department: 3.5 mm
Material: the African ebony (specific gravity about 1.4)
We combine (4 pieces the price: 3,600yen)
Yamamoto sound craft
Co., Ltd.
726 Sakaki-tyo Ono-city Hyogo
675-1323 Japan TEL81-794-62-5655 FAX81-794-63-6405
お問い合わせ(Inquiry): shige-y@mh1.117.ne.jp
担当(Charge):山本(Yamamoto)
Copyright ? 2002-2009 Yamamoto Sound Craft All Rights Reserved.