Audio base, Insulator, Audio Accessories Page 9

RS-1 For analog players Record stabilizer \12,000 (according to tax)
RS-1 is the amount class record stabilizer of inside with 84mm in diameter, 20mm [ in height ], and a weight of 380g. Since it is designed so that a record board may be touched only in a perimeter part on the back, a record board is not dumped too much, and the merit of sound is the feature. gun money began to delete, it came out, and the quality of the material has adopted nonmagnetic silver plating smoked finish. It is considered so that the magnetism of a cartridge or a turntable may not be affected.

AL-2 For analog players Simple substance arm lifter unit \12,000 (according to tax)
AL-2 is an arm lifter of a type every exception for the arms to which a lifter is not attached, and it is a convenient product which can perform the upper and lower sides of an arm smoothly by the power of oil pressure. It is used placing on a player board. It can carry out variable of the height from a player board to 39-53mm in the arm lower part. The amount of lifts is about 3mm. It is useful also when a lifter breaks down with an old arm etc.

HS-1A Head shell made from the Africa ebony
Standard lead attached \7,800 (according to tax)
It is the head shell made from the Africa ebony of the specific gravity 1.4 used for a clarinet, oboe, etc. In wood, a clear and forcible sound is the feature because of a very hard and tough material. The line of vinyl covering with a standard lead is attached. A finger hook is Gold plating of bronze. Prudence is 10.6g. the size of the main part part except a connector part It is 18 (W) 18 (H) 50 (L). Three kinds of attachment screws of bronze gold plating are attached.
HS-1AS 6N copper lead attachment and head shell made from the Africa ebony
6N copper lead attached \11,000 (according to tax)
It is the product which adopted 6N copper wire as the lead of HS-1A. The arm side is soldered directly and the four-place point of contact is decreasing. The quality of the material is the Africa ebony of specific gravity 1.4. The lead is used through a Teflon tube by 9 twists of the diameter of 0.26mm with 6N copper wire. A lead cannot be renewed because of soldering. A finger hook is Gold plating of bronze. Prudence is 10.6g. the size of the main part part except a connector part It is 18 (W) 18 (H) 50 (L). Three kinds of attachment screws of bronze gold plating are attached.
Head shell made from HS-2 Asada Cherry wood
Standard lead attached \7,300 (according to tax)
It is the head shell made from the Asada Cherry wood of the specific gravity 0.73 of established reputation in the good thing of sound. The tendency of sound is light and it is the feature that a feeling of atmosphere comes out well. Prudence is 10.4g. The line of vinyl covering with a standard lead is attached. A finger hook is Gold plating of bronze of 1mm thickness. The finger hook part and the thread part of the main part were designed as a component of one. The size of the main part part except a connector part It is 18 (W) 18 (H) 50 (L). Three kinds of attachment screws of bronze gold plating are attached.
HS-3 Head shell made from boxwood material
Standard lead attached \7,800 (according to tax)
It is using-boxwood material of very fine specific gravity 0.75 head shell. Boxwood material is a precious material which was used for the comb etc. a decade ago and known for the precision and strength. Sound with an early beautiful reaction is the feature so that the precision of grain may appear in sound. The line of vinyl covering with a standard lead is attached. A finger hook is Gold plating of bronze. Prudence is 10.6g. the size of the main part part except a connector part It is 18 (W) 18 (H) 50 (L). Three kinds of attachment screws of bronze gold plating are attached.