Audio base, Insulator, Audio Accessories Page 2

PB-9 Product pin type base made from the Africa ebony
Four pcs. set \4,200 (according to tax) Withstand load: 50kg (four pieces)
It is a pinpoint base of the diameter of 32mm of the Africa ebony used for oboe etc. Or combining PB-10, it places under a speaker, amplifier, etc. and a sound quality improvement can be performed. The effect that specific gravity tightens sound by the pinpoint support effect for 1.4 and the strong, very heavy quality of the material becomes large. The height of 19mm and a spike part of the height of a main part is 5mm.
PB-10 Product spike receptacle base made from the Africa ebony
Four pcs. set \3,600 (according to tax) Withstand load: 50kg (four pieces)
It is a spike receptacle base of the diameter of 32mm of the Africa ebony used for oboe etc. Or combining PB-10, it places under a speaker, amplifier, etc. and a sound quality improvement can be performed. When a metaled spike is received, in metal, resonance is suppressed and the sound which was clear and became tight by intrusion of a moderate spike is obtained.
PB-11A Speaker base for inside large-sized
Six pcs. set \27, 000 or 1 piece \4,500 (according to tax) withstand load: 60kg (four pieces)
In the combination of the square-shaped base of Asada Cherry wood material, and the pin type base made from an ebony, it is stabilized and a Chuo University type speaker is supported. At 90mmx90mmx78mm in height, since mass is large, the size can use it also for a large-sized speaker, feeling easy. The inside of the base of Asada Cherry wood material is a spike receptacle.
PB-12 Speaker base for minor types
Four pcs. set \8,200, withstand load (according to tax): 60kg (four pieces)
In the combination of the square-shaped base of Asada Cherry wood material, and the pin type base made from an ebony, it is stabilized and a minor type speaker is supported. A size is 35mm in 70mmx70mmx height, since the up-and-down side is even, is stabilized and supports a speaker. The inside of the base of Asada Cherry wood material is the concave form of the spike receptacle.
Product made from QB-100 Asada Cherry wood large-sized cube base
Six pcs. set \24, 000 or 1 piece \4,000 (according to tax) withstand load: 100kg (three pieces)
It is a cube base where the 100mm angle made from Asada Cherry wood with strong made in Hokkaido Japan is big. It places under a speaker, amplifier, etc. and a sound quality improvement is carried out. Since specific gravity is as hard as 0.75 and heavy, sound becomes a firm precise sound. It is effective for tightening the sound of a large-sized speaker. The plainness of a low-pitched sound region will improve, since the installation position of a speaker becomes high 10cm.
PB-18 Product spike receptacle base made from the Africa ebony
4 pcs. set \6,900 (according to tax) withstand load: 60kg (four pieces)
It is the spike receptacle base which combined the spacer of ceramics with the back side of the Africa ebony used for oboe etc. When metal spikes are received, it catches firmly by an ebony and sidewall is the ideal spike receptacle that three points are supported by a ceramic spacer. The loose R attaches the surface of the ceramic spacer and it is difficult to damage a floor.
B-45 The plate type base for speaker amplifier 19,000yen per sheet Withstand load: 60kg
It is a plate type base by the laminate lumber of Asada Cherry wood material.
A size is 450iW) 430(D) 25(t)
It weighs 3.6kg.
A speaker, amplifier, etc. are put and a sound quality improvement can be performed.
The apparatus which carried upwards by the vibration proof of natural high-class wood and the merit of sound is stabilized. If it covers under a rack or a speaker stand, the sound which stability improved and became tight will be obtained.
B-60 The plate type base for speaker amplifier30,000yen per sheet Withstand load: 70kg
It is a plate type base by the laminate lumber of Asada Cherry wood material.
A size is 600iW) 480(D) 25(t)
It weighs 6.4kg.
A speaker, amplifier, etc. are put and a sound quality improvement can be performed. The apparatus which carried upwards by the vibration proof of natural high-class wood and the merit of sound is stabilized. If it covers under a rack or a speaker stand, the sound which stability improved and became tight will be obtained.
B-90 The plate type base for speaker amplifier 54,000yen per sheet Withstand load: 80kg
It is a plate type base by the laminate lumber of Asada Cherry wood material.
A size is 900iW) 560(D) 25(t)
It weighs 9.5kg.
A speaker, amplifier, etc. are put and a sound quality improvement can be performed. The apparatus which carried upwards by the vibration proof of natural high-class wood and the merit of sound is stabilized. If it covers under a rack or a speaker stand, the sound which stability improved and became tight will be obtained.