Speaker stand department material DKS-SP10 new launching
DKS series for prop height 100 mm for (a real Sun 56 mm): DKS-SP10 4,000yen(1 pc.)
In the case that 2 sheets of DKS-UPD3S and PB-9 are combined DKS-SP10
As the speaker stand of the desk optimal
We have come to launch the product of the height of 100 mm of the prop for the speaker stand of the DKS series as the new product recently, in our company. Although the thing of the height of 200 mm were the lowest type formerly the lower stand is desiring and respond to the request and did the commercialization.
This product uses it as for the speaker combining small with DKS-UPD3S (160Wx210D) etc. of the smallest boards of the DKS series. This is hypothesizing top etc. of the desk as the comfortable place. We recommend the such usage that puts to top etc. of the desk of the study and the speaker become to about the height of the just ear. The distance to the speaker is hypothesizing about about 1 m.
You could use it conveniently in the case that a highly efficient speaker is used with the short distance with the small size, because there was not the stand of such the height formerly.
Even the small size the strength is over to a big stand and do not take. Needless to say the material is hard the performance that the speaker has is take the trouble of drawing to the maximum because we are adopting the undirt material of 10 cm of squear of the beautiful Asada cherry tree of the sound. It is possible to arrange pinpoint base PB-9 made of the ebony to the face of the top and bottom of the stand and support 3 points with the top and bottom face. 《主語なし》Putting the speaker on the desk it been being used we ask to cause the establishment, to the one who is promoted by all means.
DKS-KIT every part material spec.s, specification
DKS series for prop height 100 mm for (a real Sun 56 mm): DKS-SP10 4,000yen
<The product in the launching>
The floorboard (the length position) for the DKS series: DKS-UPD 10,500yen
The floorboard (the side position) for the DKS series: DKS-UPW 10,500yen
The under board (the length and breadth combined use) for the DKS series: DKS-BTD 10,500yen
The under board (the length position) for the DKS series: DKS-UPDM 10,000yen
The under board (the length position) for the DKS series: DKS-UPDS 9,500yen
The under board (the length position) for the DKS series: DKS-UPDSS 9,000yen
The under board (the length position) for the DKS series: DKS-UPD3S 8,000yen
DKS series for prop height 700 mm for (a real Sun 656 mm): DKS-SP70 10,000yen
DKS series for prop height 600 mm for (a real Sun 556 mm): DKS-SP60 8,500yen
DKS series for prop height 500 mm for (a real Sun 456 mm): DKS-SP50 7,000yen
DKS series for prop height 400 mm for (a real Sun 356 mm): DKS-SP40 6,000yen
DKS series for prop height 300 mm for (a real Sun 256 mm): DKS-SP30 5,000yen
DKS series for prop height 200 mm for (a real Sun 156 mm): DKS-SP20 4,000yen
DKS-60 (the standard type set product) the spec., specification
Use material: the main body: all the japan made Asada cherry tree material, pin department: the African ebony
External form measure: 300 (W)x400 (D)x606 (H)
Board size of the upper side: 250 (W)x360 (D)
Size of the prop: 100 mmx100 mm
Thickness of the top and bottom board: 32 mm
Weight: about 8.9 kg (1 unit)
We finish the urethane coating (the wolnut color) with a touch of the furniture
The price: 68,000yen/1pair (the setting base belonging made of the African ebony)
Department material for 1 set of case that uses DKS-SP10
DKS-SP10 x 2 pcs
DKS-UPD3S x 4 sheets
PB-9 x 3 sets
In all 1 set 50,500yen
Measure figure of the DKS-KIT every part material
Copyright ? 2002-2009 Yamamoto Sound Craft All Rights Reserved.